Author：MarwenDate：2024-1-4
Get to know the charging interface
There are two types of charging interfaces on the car body: fast charging port and slow charging port. The distinction is as follows: the one with two particularly large holes is the fast charging port, and the one with basically the same size is the slow charging port.
There are two types of charging guns. In addition to corresponding jacks, the sizes and weights are also different. Please distinguish between them and insert them into the corresponding interface. The fast charging gun is heavier and the cable is thick; the slow charging gun is lighter and the cable is thinner.
Basic steps for charging
1. The vehicle is put into P gear or turned off when stopped: Some models cannot start charging when the engine is not turned off!
2. Open the charging port cover and check carefully: Pay attention to whether there are water stains, mud, sand or other foreign matter on the interface, especially on rainy days, be sure to check clearly.
3. Take out the charging gun from the charging pile: Press the switch with your thumb and pull out the charging gun. Also check the interface for water stains, mud, sand and other foreign matter.
4. Insert the charging gun into the corresponding charging port and push it all the way: Do not press the switch when inserting the gun. When you hear the "click" lock sound, it means that it has been inserted in place.
5. At this time, the vehicle screen will display “Charging pile connected”.
6. Use your mobile phone to scan the QR code on the charging pile: Use the corresponding APP or mini program to scan the code, or you can use it directly
7. Complete the payment on your mobile phone and start charging.
8. View charging data: You can view voltage, current, charging capacity, battery life and other data on the screen of your mobile phone/car/charging pile.
9. Stop charging: Press the phone to stop charging or it will stop automatically when it is fully charged.
10. Pull out the gun and close the charging port cover: Press the switch and pull out the charging gun, and close the charging port cover at the same time to avoid forgetting.
11. Return the charging gun to its original position.
↓Next [ A brief analysis of the future development trends of charging pile manufacturers ]
